Cut From 2.0mm And 2.2mm Full Grain Printed Water Buffalos Sides; Two Pull Straps For Ease Of Entering The Boot;The Vamp Lining Is From A Hi-Tech Needle-Fibre Blend With Excellent Perspiration Absorbency And Treated With Ultra Fresh Technology To Impart Hygienic And Anti-Bacterial Properties To The Material; The Energiser Poron Eva Top Sock Is From A Combination Of Polyester And Wool; With Excellent Perspiration Absorbency. Bonded To A Layer Of Eva; The Poron Inserts At The Ball And Heel Of The Top Sock Offer Optimum Support Where It Is Needed Most; Ensuring Dynamic Impact Compression And A Gentle Rebound With Every Step.
The Top Sock Responds To Weight And Temperature. Moulding Itself To The Foot. Resulting In Fewer Aches And Pains.
The Top Sock Has Been Treated With Ultra-Fresh Technology To Impart Hygienic And Anti-Bacterial Properties To The Material; The Sole Is From Dual Density Pu Vibram Rubber; The Midsole Is From A Low Density Flexible Polyurethane With A Shore Hardness Of 0.45 - 0.5 ;The Outer Sole Is From Vibram Rubber With A Src Slip Resistance Rating; The Boot Soles Have Been Subjected To Voltage Of 20Kv Ac Rms For 60 Seconds; The Sole Can Withstand Temperatures Up To 300 Degrees Celcius ;The Sole Is Non-Conductive ;The Boot Comes Standard With An Anti-Penetration Midsole; Steel Toecap - Extra-Wide Fitting Can Withstand An Impact Load Of 200 Joules; The Rigger Boot Has Been Tested To Comply With En / Iso 20345 Specifications And Carries The En/ Iso 20345 Certified Mark; This Product Is Manufactured In South Africa By Bbf Safety Group. In An Iso 90001 Accredited Factory;November 2020 Extreme Wear Range.
The Top Sock Responds To Weight And Temperature. Moulding Itself To The Foot. Resulting In Fewer Aches And Pains.
The Top Sock Has Been Treated With Ultra-Fresh Technology To Impart Hygienic And Anti-Bacterial Properties To The Material; The Sole Is From Dual Density Pu Vibram Rubber; The Midsole Is From A Low Density Flexible Polyurethane With A Shore Hardness Of 0.45 - 0.5 ;The Outer Sole Is From Vibram Rubber With A Src Slip Resistance Rating; The Boot Soles Have Been Subjected To Voltage Of 20Kv Ac Rms For 60 Seconds; The Sole Can Withstand Temperatures Up To 300 Degrees Celcius ;The Sole Is Non-Conductive ;The Boot Comes Standard With An Anti-Penetration Midsole; Steel Toecap - Extra-Wide Fitting Can Withstand An Impact Load Of 200 Joules; The Rigger Boot Has Been Tested To Comply With En / Iso 20345 Specifications And Carries The En/ Iso 20345 Certified Mark; This Product Is Manufactured In South Africa By Bbf Safety Group. In An Iso 90001 Accredited Factory;November 2020 Extreme Wear Range.